Let's go to the bedroom and strip.

Excited?  You should be!

So the master bedroom had a very special wall.  A wallpapered wall.  Wallpaper had been cut into rectangles and put up on a wall. 

I have to strip this wall.  Please help me.


Black backed paper?

Have you ever stripped wallpaper?  There's three steps. 

1. remove the front paper part
2. remove the backing paper part
3. wash the glue off the wall

I've done this many times before.  The easiest way is to spray warm water on it and start scraping and peeling.  The highlight of the task is when a huge piece of paper peels off in one sheet!  Unfortunately, when you cut it into rectangles before installing it, there are no huge pieces.  Like other projects, I thought this could be done in an afternoon.  When it was all said and done, it was about 36 hours of work. 




I had to.


 

The paper had a foil facing in a kind of wood look.  So the foil wasn't solid and I assume that's why it didn't come off in big sheets.  I got one rectangle to come off as a complete piece and it was at the very end.  Also the backing paper was black....something I've never seen before.....and as it got wet, it created this black mess.  Ugh.  This was a tough one. 

Like other projects, it did get done and felt so good! 

Now to pick a paint color.  Our bed is something we brought with us, so we need to work with an espresso colored frame and light blue/grey fabric.  The living and dining room area will be Pensive Sky by Behr.  The master bath is a very white/blue I created myself.  I need something neutral for the bedroom. 

I finally found a taupe/grey/beige color that is perfect.  It's Chocolate Froth by Behr.  It's soooo soft and soothing.  We have white drapes and the trim is being painted white.




I love the color and with our new wall mounted, swing-arm lamps and new nightstands and dresser, the bedroom is coming together.  I still need art and a mirror. 

By the way, I found the lamps for $20 each at the Habitat for Humanity ReStore here in Atlanta, but they had no shades.  I found shades at Target for $14 each, but they wouldn't fit.   I ended up getting shades at a lighting store for $45 each!  I could have bought new lights.  Oy. 

I wish you could see the color in this photo.  Colors just don't photograph well, or at least with a smart phone they don't.  Sorry.






New nightstands/dresser and Chocolate Froth paint!

Will this ever be finished?????

The bar is set too high, but I try!

My very first post was about my obsession, click here to referrence where this whole thing started and where I want it to go. 

One of the main factors in making a room feel French is the trimwork on the walls and ceilings.  You have work with what you have, so I set out to fill the living and dining rooms with as much trim as I could. 

I knew hiring someone to do this would be out of my budget, so I have no other option than to do it myself.

 No, I haven't ever hung trim before.  No, I don't know how to use a compound miter saw.  No, I don't know how to use a brad nailer.  No, I don't know how to use an air compressor.

No problem.  That's what YouTube is for, right?  No kidding.  I borrowed the tools and watched countless videos on the subjects! 


Miter saw on our balcony.

The first step was to put crown moulding in the dining room.  The living room and bedrooms already had crown, so the dining room had come catching up to do. 

As mentioned in a previous post, the dining room had a paint treatment that you could see AND feel.  The striped walls also had a heavy texture.  I bought a hand-held orbital sander and spent several hours taking that texture off.  I look forward to painting over those stripes, but trim is next. 



The new table became the work station. 

We started hanging crown and realized caulk was going to have to hide a multitude of sins!  That's okay, we got it up and then jumped on to the chair rail.  It was rewarding to see it going up, but nothing felt as good as completing what's called a "dead end" in moulding.  It's where moulding ends, but there's no wall for it to run into.  You have to create an "ending".  


Impressed, aren't you? 



Crown and chair rail complete!!

The chair rail had to continue into the living room and so was a pretty big job.  I won't begin to tell you how many times we had to do a piece over, or rely on caulk to hide things like uneven walls, but I think it turned out great!

Okay, now for the real transformation trim......this should be a snap!!!  I got this!!!  I can get this done in the afternoons before the hubby even gets home!!! 

OMG.

First I had to measure for this small, inexpensive trim and go buy it.  Let's see, measure, measure, measure.  Wait, that's over 1000 feet.  Can't be right.  I'll measure again tomorrow. 

Yep.  Over 1000 feet.  No matter how cheap it is per foot, anything multiplied by 1000 is A LOT!!!  Holy freaking cow! 

Uh and yeah, Home Depot doesn't just keep over 1000' of any trim in stock.  You can't just go in the store, grab one of those crazy flat carts and load up 1000' of trim. 

Who would even think you could?  Me, that's who.  I totally did not think that through.  Did I think it would fit in my suv...my small suv? 

Turns out you have to order it from Home Depot and if it's over $45, they ship it for free!!  I know!  Yes, it was over $45.  Don't ask. 

After many, many, many hours, I finally finished this trim work!  At times, I regretted starting it.  It was as if I would never be finished.  It's back-breaking, tedious work. 

Do I regret it now?  H. E. Double hockey sticks NO!  I love it and it's not even painted yet!!! 

There's no time to relax though, I now have to caulk over 1000 feet of trim.  Will this ever be finished?




That's a lot of squares!




This may be my favorite part. 

I'm calling this finished!!!

The Master Bath.  Aaahhhh. 

Master bathrooms are supposed to be like spas, right.  A retreat.  An escape.  A respite. 

Our master bath is all of those things, mainly because it's finished and that makes me feel good!!!!!

The paint turned out perfect.  The lights are just what I wanted, although if an electrician happens to come in I may ask them to be moved closer to the mirror. 

Remember my rant about stupid man decisions?  This bathroom has a separate shower and bath.  The bath has a shower head and used to have a shower curtain rod!  Why?  What dumb *ss man decided to spend good money on those unnecessary things?  Things I have to un-do.  Okay, I'm not un-doing the actual shower head.  Not sure what that would involve, but I do know there is a pipe coming straight through marble and that can't be an easy fix.  Shower caulk can only fill a hole to a certain size.


It's finished!!!!

I did take down the shower rod.  It was put up with screws, which had plastic wall anchors to hold them.  Blue plastic wall anchors.  Blue plastic wall anchors that could NOT be ignored.  Sorry, no picture of those, but I had some difficulty getting those out of the wall.  I tried pushing them in and tried pulling them out, but was afraid of breaking the marble. 

Darryl to the rescue!  My friend Darryl said "just put a screw part-way back in the anchor and pull them out".  Duh.  Worked like a charm and after caulking the holes, you can't even see they were there!!! The picture here proves it. Love projects with happy endings!!!

 He's a Solution Solver!!  That's a double positive!!!

I'm happy with the bath and other than some accessories that could come or go.......


IT'S FINISHED!!!!!!!

One room down and only 6 more to go!!!